카테고리 없음

Sony VPL-PHZ50 rs232 command

풀등 2022. 12. 21. 11:01

Answer form ChatGPT.

The Sony VPL-PHZ50 is a projector that can be controlled using RS232 commands.

RS232 is a standard for serial communication transmission of data.

It is commonly used in computers and other devices to communicate with each other and transfer data.

 

To control the VPL-PHZ50 projector using RS232 commands, you will need to connect the projector to a device with an RS232 port, such as a computer or control system, using a serial cable.

You can then send commands to the projector using the appropriate command syntax and protocols.

Some examples of RS232 commands that you can use to control the VPL-PHZ50 projector include:

  • "PWR ON" to turn the projector on
  • "PWR OFF" to turn the projector off
  • "INPT SOURCE HDMI1" to select the HDMI1 input source
  • "VOLUME UP" to increase the volume
  • "VOLUME DOWN" to decrease the volume

It's important to note that the specific command syntax and available commands may vary depending on the version of the projector and the control system you are using. You should refer to the documentation for your projector and control system for more information on the specific commands and their usage.